How do I assign manual wireless setting on my TV?


To setup your Philips TV with manual settings please follow the steps listed below:

Note: you will need the Default Gateway, IP Address, Subnet Mask, Primary and Secondary DNS of your network. You can find this information but following the FAQ for “Where can I find my IP address, Default Gateway, Subnet Mask, and DNS Servers?”
  1. Press Menu on the TV remote. Select [Setup] and then [Network].
  2. Select [IP configuration] from the [Manual network settings] menu screen.
  3. Select [IP setting mode].
  4. Select [Manual].
  5. The current IP address is populated in the fields.
  6. Select each of the fields below to change the address. Please use the information at the top of the manual section to help you choose an IP address.
    Note: For example if your IP address was then enter The TV will not work above .254. Always try .222 first and if that doesn’t work go lower. Make sure to keep the first part of the IP address the same as the Default Gateway i.e. 192.168.1.### or whatever your Default Gateway is.
  7. Run the [Connection Test] from the [Network] menu. If connected correctly it should pass the test.


Was this document helpful?

Yes No Need to try first

Give us your feedback on this FAQ. What could we have done to to answer your question better?