Question

NO INPUT SIGNAL message shown on screen when you switch on.

Answer

  1. Check that the VGA Video cable connection from the PC to the PC input (VGA) jack on the bottom of the TV is properly secured.
  2. If the connection is good, then the problem could be due to the switching on sequence of the TV and the PC.
    The recommended sequence:
    1. First turn on the TV and switch it on to a TV programme.
    2. Then turn on the PC and wait till the PC boot up.
    3. Press the 'VGA' button on the remote control to enter into VGA mode.

Was this document helpful?

Yes No Need to try first

Give us your feedback on this FAQ. What could we have done to to answer your question better?