Question

Connecting Home Theater to external audio equipment

Answer

Option 1: Using 6 Channel In jacks

If your DVD/SACD player has a built-in multichannel decoder (e.g. Dolby Digital, DTS) and has 6-channel (multichannel) output jacks, you may use the audio cables (not supplied) to connect the AV receiver’s 6 CHANNEL IN jacks to the corresponding output jacks on the DVD/SACD player.

  1. Before starting operation, start playing back the connected source as usual.
  2. Press DISC on the remote to select "DISC 6CH" in order to activate the input source, then press VOL +/- to adjust the volume level.

 

Option 2: Using Coaxial In jack

Use an coaxial cable to connect the AV receiver’s COAXIAL IN jack to the COAXIAL output jack on the DVD/SACD player.

  1. Before starting operation, start playing back the connected source as usual.
  2. Press DISC on the remote to select "DISC COAX" in order to activate the input source, then press VOL +/- to adjust the volume level.

 

Option 3: Using Optical In jack

Use an optical fiber-optic cable (not supplied) to connect the AV receiver’s OPTICAL IN jack to the OPTICAL output jack on the DVD/SACD player.

  1. Before starting operation, start playing back the connected source as usual.
  2. Press DISC on the remote to select "DISC OPTI" in order to activate the input source, then press VOL +/- to adjust the volume level.

 

Was this document helpful?

Yes No Need to try first

Give us your feedback on this FAQ. What could we have done to to answer your question better?