Question

Hookup Home Theater to a television

Answer

  1. Make sure the receiver is switched off and unplugged from the wall outlet before making any connections.
     
  2. Connect the Scart control (2.5 mm jack) of the 6-cinch + Scart control to Scart cable supplied to the SCART CONTROL connector of your DFR9000. When your DFR9000 is reactivated after being switched off, Scart control switches your Scart-enabled TV to the correct input source immediately.
     
  3. Connect the red, green, blue and yellow plugs of the cable to the corresponding VIDEO OUT connectors of your DFR9000.
     
  4. Connect the red and white audio plugs of the cable to the corresponding LINE OUT connectors of your DFR9000.
     
  5. Connect the Scart connector at the other end of the cable to the Scart input connector of your TV.

  • If your TV is equipped with an S-Video input socket you can connect this socket to the REC OUT output socket of your DFR9000. For this, use an optional SVideo connection cable.
  • If your TV is equipped with a CVBS input socket you can connect this socket to the CVBS output socket of your DFR9000. For this use an optional 1-cinch connection cable.

Was this document helpful?

Yes No Need to try first

Give us your feedback on this FAQ. What could we have done to to answer your question better?