Question

Timer Recording (Manually)

Answer

  1. Turn on the TV power. Select the correct Video In channel at the TV.

  2. Press TIMER on the remote control. The timer schedule list appears.

  3. Use keys to highlight the next available empty slot and press OK. The VCR Plus+® System setup menu appears.

  4. Select { CANCEL } (or { MANUAL }) in the menu and press OK. The timer editor menu appears.

  5. Use keys to select an entry in the menu and press to enter its options.

    • Source – Use  keys to select the recording input source.

    • Rec To – Use  keys to select HDD or DVD to enter the recording destination.

    • Rec Mode – Use  keys to select your option.

    • Mode – Use  keys to select Once, Daily or Weekly recordings.

    • Date – Use  keys or the numeric keypad 0-9 to enter the date for recording.

    • Start – Use  keys or the numeric keypad 0-9 to enter the start time of recording.

    • End – Use  keys or the numeric keypad 0-9 to enter the end time of recording.

    • Title – Use  keys to select the alphanumeric options to enter the title of your recording.

  6. Select { OK } in the menu and press OK. The system will store the timer entry and return to the timer schedule list.

  7. Press TIMER to exit the menu.

  8. Press STANDBY-ON to turn off the recorder. If the recorder is not in standby mode, a warning message will appear three minutes before the recording starts.

Was this document helpful?

Yes No Need to try first

Give us your feedback on this FAQ. What could we have done to to answer your question better?