Question

How do I program my TV channels?

Answer

NOTE: You only need to program channels if you are using an antenna connection.

You are able to manually program additional channel(s) by following these steps:

  1. Press the and buttons on the remote control at the same time to access the installation menu.
  2. Press the cursor down to select MANUAL INSTALLATION and press the ‘OK’ button.
  3. Select SYSTEM and press the cursor right to select the correct system used in your location.
  4. Press the cursor down to select PROGRAMME NO and press the cursor right to select the channel you wish to store the new programme.
  5. Press the cursor down to select SEARCH and press the ‘OK’ button to start searching.
  6. The searching will stop once a programme is found. If you wish to continue searching, press the ‘OK’ button again.
  7. Once the programme is found, select STORE and press the ‘OK button to store.
  8. If you wish to continue searching for another programme, repeat steps 4 to 7.
  9. Once completed, press the 'MENU' button repeatedly to exit the menu.

If you need to add more channels, it is recommended to perform the auto search again to restore all the channels in the TV memory.

Follow these steps to perform the automatic installation:

  1. Press the and buttons on the remote control at the same time to access the installation menu.
  2. Press the cursor down to select AUTOMATIC INSTALLATION and press the ‘OK’ button.
  3. Select START and press the ‘OK’ button to start the automatic installation.
  4. Once the installation is completed, press the ‘MENU’ button repeatedly to exit the menu.

Was this document helpful?

Yes No Need to try first

Give us your feedback on this FAQ. What could we have done to to answer your question better?