Question

Wired Connection if you want to connect Music Center to an existing Wired Network with Wired Router.

Answer

  1. Check you have finished the Wi-Fi connection between WAC 700 Center and WAS700 Station.
     
  2. Check your WAC700 Center is switched on or to standby mode.
     
  3. Switch on the PC with administrator's privileges.
     
  4. Close all the applications on your PC, including the internet connection.
     
  5. Connect the supplied Ethernet cable (straight cable) to Center’s ETHERNET port.
     
  6. Insert the installer CD into your PC and select your desired language.


     

  7. Select Express Installation.


     

  8. Check the wired router is working properly and enable its DHCP.
     
  9. In Software Installation page, click to select Music Center connect to Wired Network
     
  10. When prompted by the installation wizard, ensure the supplied Ethernet cable (straight cable) is connected to Center’s ETHERNET port.
     
  11. When the screen on the right appears, select Obtain an IP address automatically.


     

  12. Follow the screen instructions to finish the PC connection. The screen shows: ......The connection to your Music Center has been established......
     
  13. To apply new settings, you need to power off WAC700 Center, and then power it on again.
     
  14. Click Next to start DMM installation. The icon appears on your computer desktop after DMM installation is finished.
     
  15. Disconnect the supplied Ethernet cable from your PC and Center, and then, connect your PC and Center to the wired router.

Was this document helpful?

Yes No Need to try first

Give us your feedback on this FAQ. What could we have done to to answer your question better?