Question

Instructions for connecting the playback device for playback via component video input.

Answer

  1. Unplug the TV and playback device before you make any connection.
  2. Use a component video cables (red/blue/green) (1), connect one end of the video cables to the component video output jacks of the playback device and the other end to the 'COMPONENT VIDEO INPUT Y PB PR' jacks on the back of the television.
  3. Use a audio cable (2), connect one end of the audio cables (red and white) to the audio right and left output jacks of the playback device and the other end to the 'AV1 IN AUDIO L' and 'R' jacks on the back of the television.
  4. Switch on the devices and press the button on the remote control repeatedly to select CVI.

Note: The component video input connection will dominate over the 'AV1 IN VIDEO' input. When a component video device is connected, it is best not to have a video signal connected to the 'AV1 IN VIDEO' jack.

Was this document helpful?

Yes No Need to try first

Give us your feedback on this FAQ. What could we have done to to answer your question better?