Good picture but no sound.


If the problem occurs on one or some channels, then do a manual installation.

  1. Select the channel that the problem occurred.
  2. Press the 'MENU' button, then press the cursor up/down to select INSTALL and press cursor left/right.
  3. Press cursor up/down to select MANUAL and press cursor left/right.
  4. Press cursor up/down to select SOUND SYS and press cursor left/right to select the correct system.
  5. If the sound is heard, press the ‘i+’ button to exit the menu.

If there is still no sound, it appears that you may have a signal problem. Contact the cable provider or local broadcaster regarding the specific channel.

Was this document helpful?

Yes No Need to try first

Give us your feedback on this FAQ. What could we have done to to answer your question better?