Question

Setup the Speakers

Answer

Connecting the SonoWave Speakers and Subwoofer

Connect the SonoWave speakers to the matching speaker jacks at the rear of the DVD system.

Placing the Speakers

  1. Place the SonoWave speakers at the normal listening ear level, equal distance from the TV and face straight ahead towards the listening area.
  2. Place the subwoofer at the corner of the room. Keep at least one meter away from the TV.

Setting the SonoWave Speakers

  1. Press and hold SOUND on the remote control to enter SonoWave speaker settings mode.
  2. Use keys to select { ROOM ACOUSTICS } and press OK.
    To return to the main SonoWave speaker settings selection, press or key.
  3. Use keys to select the condition of the room and press OK to confirm.

    • { HARD } for concrete/glass walls.
    • { SOFT } for wooden walls.
  4. Use keys to select { SPEAKER DISTANCE } and press OK.

  5. Use keys to select the distance between the two SonoWave speakers and press OK to confirm.

    • { NEAR } for distance less than 1 meter (3’ 5”)
    • { DEFAULT } for distance between 1 meter (3’ 5”) to 2.5 meters (7’ 7”)
    • { FAR } for distance more than 2.5 meters (7’ 7”)
  6. Use keys to select { LISTENING POSITION } and press OK.

  7. Use keys to select the distance between the listening position and the SonoWave speakers and press OK to confirm.

    • { NEAR } for distance less than 1.5 meters (4’ 7”)
    • { DEFAULT } for distance between 1.5 meters (4’ 7”) to 2.5 meters (7’ 7”)
    • { FAR } for distance more than 2.5 meters (7’ 7”)
  8. The SonoWave speaker settings are now completed and the system will exit the setting automatically.

Was this document helpful?

Yes No Need to try first

Give us your feedback on this FAQ. What could we have done to to answer your question better?