Question

Timer recording (ShowView/VIDEO Plus+ system)

Answer

  1. Turn on the TV power. Select the correct Video In channel at the TV.

  2. Press TIMER on the remote control. The timer schedule list appears.


  3. Press OK to confirm. Or, press key to go to the next available empty slot and press OK. The SHOWVIEW® System/VIDEO Plus+® System menu appears.


  4. Use the numeric keypad 0-9 to enter the SHOWVIEW® / PlusCode programming number for the show you wish to record. (e.g. : 5-312-4 or 5,312 4, key in ‘53124’.)

    To cancel the SHOWVIEW®/VIDEO Plus+® programming, press RETURN on the remote control.

  5. To confirm your entry, select { CONFIRM } in the menu and press OK.

  6. Use keys to select an entry in the menu and press to enter its options.

    • { Source } – Use keys to select the recording input source.

    • { Rec To } – Use keys to select { HDD } or { DVD } to enter the recording destination.

    • { Rec Mode } – Use keys to select your option.

    • { Mode } – Use keys to select { Once }, { Daily } or { Weekly } recordings.

    • { Date } – Use keys or the numeric keypad 0-9 to enter the date for recording.

    • { Start } – Use keys or the numeric keypad 0-9 to enter the start time of recording.

    • { End } – Use keys or the numeric keypad 0-9 to enter the end time of recording.

    • { Title } – Use / keys to select the alphanumeric options to enter the title of your recording.

    • { VPS/PDC } – Use keys to turn on/off the VPS/PDC mode

  7. Select { OK } in the menu and press OK. The system will store the timer entry and return to the timer schedule list.

  8. Press TIMER to exit the menu.

  9. Press STANDBY-ON to turn off the recorder.

Notes:

  • Insert a DVD±R/+RW into the recorder if { DVD } is selected to be the recording destination.

  • If the recorder is not in standby mode, a warning message will appear three minutes before the recording starts.

  • The ‘TIMER’ icon will light up on the display panel if a timer recording is set.

Was this document helpful?

Yes No Need to try first

Give us your feedback on this FAQ. What could we have done to answer your question better?