Question

Timer recording (Manually)

Answer

  1. Turn on the TV power. Select the correct Video In channel at the TV.

  2. Press TIMER on the remote control. The timer schedule list appears.


  3. Press OK on the remote control. The SHOWVIEW® System/VIDEO Plus+® System menu appears.


  4. Select { MANUAL } or { CANCEL } in the menu and press OK. The timer editor menu appears.

  5. Use keys to select an entry in the menu and press to enter its options.

    • { Source } – Use keys to select the recording input source.

    • { Rec To } – Use keys to select { HDD } or { DVD } to enter the recording destination.

    • { Rec Mode } – Use keys to select your option.

    • { Mode } – Use keys to select { Once }, { Daily } or { Weekly } recordings.

    • { Date } – Use keys or the numeric keypad 0-9 to enter the date for recording.

    • { Start } – Use keys or the numeric keypad 0-9 to enter the start time of recording.

    • { End } – Use keys or the numeric keypad 0-9 to enter the end time of recording.

    • { Title } – Use / keys to select the alphanumeric options to enter the title of your recording.

    • { VPS/PDC } – Use keys to turn on/off the VPS/PDC mode.

  6. Select { OK } in the menu and press OK. The system will store the timer entry and return to the timer schedule list.

  7. Press TIMER to exit the menu.

  8. Press STANDBY-ON to turn off the recorder to standby mode.

 

Notes:

  • Insert a DVD±R/+RW into the recorder if { DVD } is selected to be the recording destination.

  • If the recorder is not in standby mode, a warning message will appear three minutes before the recording starts.

  • The ‘TIMER’ icon will light up on the display panel if a timer recording is set.

Was this document helpful?

Yes No Need to try first

Give us your feedback on this FAQ. What could we have done to answer your question better?