Question

How can I connect the speakers?

Answer

  1. Place the main unit with the front side down on a flat, stable surface.
  2. Remove the detachable cover on the back of the main unit. This will expose the terminals for connections.

Connecting the front speakers:

  1. Locate the SPEAKER OUT terminals on the right side of the back of the main unit. There are two jacks: one labeled as R and the other as L.
  2. Connect the two front speaker cables to the SPEAKER OUT terminals. Insert the right speaker cable (red) to “R” terminal and the left speaker cable (WHITE) to “L” .

Connecting the subwoofer:

  1. Locate the 15-pin D-sub cable.
  2. Locate the “CONNECT TO SUBWOOFER” terminal on the back of the main unit.
  3. Connect one end of the 15-pin D-sub cable to the “CONNECT TO SUBWOOFER” terminal on the back of the main set.
    • When you connect the 15-pin D-Sub cable to the terminals, match the pins and screw tightly the screws to ensure firm connection.
  4. Connect the other end of the 15-pin D-sub cable to the “CONNECT TO MAIN” terminal on the back of the subwoofer.
    • When you connect the 15-pin D-Sub cable to the terminals, match the pins and screw tightly the screws to ensure firm connection.

The figure below shows the connection of the main unit with the front speakers and with the subwoofer.


Placing the front speakers:

There are 2 options to place the front speakers.

  • Place the front speakers on a tabletop.
    Make sure the bracket on the back of the front speaker is extended so that the front speaker can stand firmly on the desktop.
  • Mount the front speakers on the main unit.
    1. Pull out the speaker link from the main unit.
    2. Loosen the screw on the back of the front speaker.
    3. Attach the front speakers to the main unit by matching the screw with the speaker link.
    4. Tighten the screws to avoid acoustic vibration.

Was this document helpful?

Yes No Need to try first

Give us your feedback on this FAQ. What could we have done to to answer your question better?