Question

Setting the TV System and TV Type

Answer

Setting the TV System

  1. In stop mode or during playback, press SYSTEM MENU.

  2. Press on the remote control to select SYSTEM SETUP and press .

  3. Use to select TV SYSTEM and press .

  4. Use to select the colour system matching the connected TV set.
    • NTSC – If the connected TV is NTSC system, select this mode. It will change the video signal of a PAL disc and output in NTSC format.

    • PAL – If the connected TV is PAL system, select this mode. It will change the video signal of a NTSC disc and output in PAL format.

    • AUTO – If the connected TV is multi system, select this mode. The output format will be in accordance with the video signal of the disc.

  5. Press OK to confirm

Setting the TV Type

  1. In stop mode or during playback, press SYSTEM MENU.

  2. Press on the remote control to select SYSTEM SETUP and press .

  3. Use to select TV Type and press .

  4. Use to select the aspect ratio of the TV to be connected.
    • 4:3 PS (Pan and Scan mode) – If you have a conventional TV set and your DVD is not formatted for widescreen viewing, use this setting. A wide picture is displayed on the whole TV screen with a portion automatically cut off.

    • 4:3 LB (Letterbox mode) – If you have a conventional TV set and your DVD is formatted for widescreen viewing, use this setting. A wide picture with bands displayed on the upper and lower portions of the TV screen.

    • 16:9 (Wide screen mode) – If you have a widescreen TV set, use this setting (you must also set your widescreen TV to “full size”) available on a disc, then the disc’s own preference will be used.

  5. Press OK to confirm.

Note: The format you select must be available on the disc. If it is not, the setting for TV Type will not affect the picture during playback.


Was this document helpful?

Yes No Need to try first

Give us your feedback on this FAQ. What could we have done to to answer your question better?