Question

Connecting Center and/or Station to external wired network

Answer

** Check that the PC is switched on and the firewall is switched off **

Network setting on Center

  1. Connect the supplied Ethernet cable to the Ethernet ports on the device and Center

  2. Press MENU on the the Center (or on the remote control)

  3. Press to select Settings and then press to enter

  4. Press to select Network and then press to enter

  5. Press to select Wired and then press to enter

    • If you are using a DHCP-enabled Access Point, select Automatic

    • If there is no DHCP, select Static and assign an IP address as prompted using the alphanumeric keys

  6. As prompted, click Yes to apply the settings. Center is connected to the external wired netwrork

Network setting on Station

  1. Connect the supplied Ethernet cable to the Ethernet ports on the device and Station

  2. Press MENU on the Station (or on the remote control)

  3. Follow Step 3 - 5 under the above Network setting on Center

  4. As prompted, click Yes to apply the settings. The Station is connected to the external wired network

 

Was this document helpful?

Yes No Need to try first

Give us your feedback on this FAQ. What could we have done to answer your question better?