Question

How to hook up the set to a television?

Answer

You can select the best video connection that your TV supports.

  1. Connect an S-video cable (for a standard TV) to:
    • the S-Video socket on this unit.
    • the S-Video socket on the TV.
  2. Connect the supplied composite video (CVSB) cable (for a standard TV) to:
    • the VIDEO OUT socket on this unit.
    • the video input socket on the TV.
  3. Connect component video cables (red/blue/green, for a standard TV or progressive Scan TV) to:
    • the VIDEO OUT (Pr/Cr Pb/Cb Y) sockets on this unit.
    • the component input sockets on the TV.
  4. Connect a scart cable(for TV with a SCART input socket) to:
    • the SCART socket on this unit.
    • the SCART socket on the TV.
  5. Connect an accessory RF modulator (for TV only has a single Antenna In Jack) to:
    • Use the composite cable (yellow) to connect the system's video jack to the video input jack on the RF modulator.
    • Use an RF coxial cable to connect the RF modulator to your TV's RF jack.

Was this document helpful?

Yes No Need to try first

Give us your feedback on this FAQ. What could we have done to to answer your question better?