Question

Connecting WAK3300 to a UPnP-enabled music server.

Answer

Before doing the connection , Two steps must be done.

  1. Check that you have already turned on a wireless/wired Access Point ( not supplied ).
  2. Check that the UPnP device is connected to the Access Point.

Using a Wireless Access Point

  1. Press HOME to enter the main menu.
  2. Press the navigation controls or and to select UPnP Music Server.
  3. Set the UPnP device.


    1. Press the navigation controls or  and  to select the network where the UPnP device is located.
    2. Set the Encryption key by :


      • Enter the Encryption key (WEP or WPA) using the alphanumeric keys if you have already set an Encryption key for your network.
      • Press the navigation controls or  repeatedly to select a letter, digit or symbol.
      • Press OK to confirm.
    3. Select Auto (DHCP).
    4. Select No when the Enable Proxy Server screen appears.
    5. Select Yes to apply the setting.
  4. Select another network.


    1. Press HOME to enter the main menu.
    2. Press the navigation controls  or  and to select Setting.
    3. Use the navigation controls or and to select Network followed by Quick Setup.
  5. Follow the above-mentioned Step 2.

Using a Wired Access Point

  1. Press HOME to enter the main menu.
  2. Press the navigation controls or and to select UPnP Music Server.
  3. Press  to enter the setup menu of Wired Ethernet.


    1. Select Auto (DHCP).
    2. Select No when the Enable Proxy Server screen appears.
    3. Select Yes to apply the setting.

 

Was this document helpful?

Yes No Need to try first

Give us your feedback on this FAQ. What could we have done to answer your question better?