Question

How can we set up waS700 to connect to waC7000 in Infrastructure Mode?

Answer

If you have a waC700 Center, use waC700 to config the waS700 SSID and WEP to that of the wirless router.

  1. Setup both the waC700 and waS700 in the present wireless router network (infrastructure) . This will setup the waS700 to have the existing network SSID and WEP.
  2. Use the waC7000 to activate station mgmt to add station.
  3. Set the waS700 to installation mode.
  4. Allow connection to take place and they should be connected.

Please be sure to restart Router, center and stations after setup.

If you do not have a  waC700 Center, set the Static address on C7K manually.

  1. On waC7000: press menu- search network - select SSID- select static IP- apply setting- yes;
    • You need to know your Router Static address and key into Center.
  2. Use the waC7000 to activate station mgmt to add station.
  3. Set the waS700 to installation mode.
  4. Allow connection to take place and they should be connected.

waS700 can not connect to waC7000 when it is set to auto IP(DHCP).

Must restart Router, center and stations after setup.

Was this document helpful?

Yes No Need to try first

Give us your feedback on this FAQ. What could we have done to answer your question better?