In order to connect a DVD Player/Home Theater to a TV that only has an antenna or cable connection, you need to convert the video signal from the DVD Player/Home Theater to an RF signal that can be fed through an antenna or cable connection. You can convert the signal by means of a RF modulator. Such a connection is typical for all DVD Players/Home Theaters and a RF Modulator can be obtained at most dealers for a nominal fee. Use the composite video cable (yellow) to connect the DVD Player/Home Theater's Video Out (CVBS) jack to the video input jack on the RF modulator.
Although there are minor differences in brands of RF modulators, the set up is basically the same for all brands.
RF Modulator Connection (Example Only)
Was this document helpful?