Question

Can I install and watch both digital cable (DVB-C) and digital terrestrial (DVB-T) channels?

Answer

Yes you can. First, you have to carry out the channel search with Antenna and repeat it with Cable.

Your TV has an integrated tuner that enables you to view free cable (or digital DVB-C) channels from the cable provider and free-to-air antenna (or digital DVB-T) channels. It is not possible to watch both DVB-C and DVB-T channels at the same time. When you switch between the respective networks, you will need to switch the corresponding antenna cables as well.

To watch the channels from each installation, you need to switch between Antenna (DVB-T) and Cable (DVB-C) in the TV's menu.

Follow these procedures to select Antenna or Cable mode:

  1. Press the button on the remote control to access the Home menu.
  2. Use the cursor buttons to select SETUP and press the 'OK' button to confirm.
  3. Select CHANNEL SETTINGS and press the ‘OK’ button.
  4. Press the cursor down to select CHANNEL INSTALLATION and press the cursor right .
  5. If the Child lock is activated, the screen will prompt you to enter your access code. If you have forgotten your access code, you can reset the access code in the CHANNEL SETTINGS>CHILD LOCK>CHANGE CODE menu. Refer to the FAQ (I have forgotten my 4-digit access code. How can I reset it?).
  6. Press the cursor down to select ANTENNA OR CABLE DVB and press the cursor right .
  7. Select ANTENNA (DVB-T) or CABLE (DVB-C) and press the ‘OK’ button to confirm.
  8. Press the button to exit the menu.

Was this document helpful?

Yes No Need to try first

Give us your feedback on this FAQ. What could we have done to to answer your question better?