The device I want to operate does not respond at all/does not respond to all of the button commands.


The problem can occur because of the following situations:

Check that the buttons you press are available on the original remote
control of the device.

If buttons are missing, they can be added.
For this, refer to chapter 4.7 'Reconfiguring buttons' or chapter
4.7.1'Adding buttons.'  

Wrong device selected in the Home screen.

• Make sure the device you wish to operate is selected in the Home
screen. For this refer to chapter 3.1 'Selecting devices.'

Battery level too low.

• Recharge the battery. For this refer to chapter 2.1 'Charging the battery.'
When operating the device, point the remote control at the device and make sure that there are no obstructions between the remote control and the device.  

Battery lifetime came to an end (battery cannot be recharged anymore).  

• Replace the battery. For this refer to chapter 7.2.2 'Replacing the

If all above solutions provided do not solve the problem, please chat with us online (at the upper right corner ), call our consumer support or contact your retailer.

Was this document helpful?

Yes No Need to try first

Give us your feedback on this FAQ. What could we have done to to answer your question better?