How to setup the wireless headphones system?


  1. Unscrew and remove the LEFT ear cushion of the headphones.

  2. Insert the only Philips shortened sleeve rechargeable NiMH batteries into the battery compartment.

  3. Put the LEFT ear cushion back into place.

  4. Connect the AC/DC adapter to the transmitter and the main power supply.

  5. To charge the headphones, place the headphones onto the energizing docking station.

    Tip: Before using the headphones for the first time, charge the supplied batteries for at least 16 hours. 

  6. Connect the transmitter to an audio device with the stereo cable. The red LED is on when it is connected.

    Tip: If the volume of the audio source is insufficient, the transmitter automatically turns off. 

  7. Power on the headphones and the red LED is on.

  8. Press and hold AUTO TUNING on the headphones for one second to tune to the correct transmission channel.

  9. If there is interference from other transmitters, adjust the transmission channel of the transmitter at the back, then repeat step 8.

  10. Adjust the volume of the headphones to the suitable listening level.

Was this document helpful?

Yes No Need to try first

Give us your feedback on this FAQ. What could we have done to to answer your question better?