I can listen to music playback from the mobile phone; but I am not able to use the microphone on a call. What should I do?


Generally speaking, there are 2 common types of 3.5 mm connector for mobile headsets in the market. For the first type, microphone connection is made through Ring #1; for the second type, microphone connection is made through the Sleeve. The picture below shows the location of Ring #1 and the Sleeve on a connector.

  Type 1 headset Type 2 headset
Tip Left channel (stereo signal) Left channel (stereo signal)
Ring #1 Right channel (stereo signal) Right channel (stereo signal)
Ring #2 Microphone Ground connection
Sleeve Ground connection Microphone

If you can listen to music but are not able to use the microphone on a call, it could be due to that only the Tip and Ring #1 are connected properly. No matter your headset is type 1 or type 2, please make sure the connector is fully inserted to the jack on your mobile phone.

In some cases where the mobile phone is covered with a protective case, special note has to be taken to fully insert the connector of the headset into the jack. If the opening for the connection jack on the case is small, you may need to remove the protective case before connecting the headset to the mobile phone.

If the headphone connector is already inserted fully but the problem persists, contact Philips Consumer Care (Contact Page) for further assistance.

Was this document helpful?

Yes No Need to try first

Give us your feedback on this FAQ. What could we have done to to answer your question better?