Question

Why does the on/off button flash?

Answer

Please check which way the light flashes.

Does the on/off button flash rapidly or slowly or does it flash rapidly a few times, followed by a pause and then rapidly again?  


Flashes rapidly:

  1. Is there enough water in the water reservoir?
    The water level needs to be above the minimum level.  

  2. Has the water reservoir been placed correctly?  
    Make sure the water reservoir has been placed correctly. Next, check that the Senseo machine is functioning properly, i.e. that the light ring starts to flash slowly.  

  3. Has the float in the water reservoir got stuck?  
    Empty the water reservoir and shake it a few times to release the float. Clean the water reservoir with hot water and some dishwashing liquid. 
     

  4. Did you place the Senseo machine in a room where the temperature is below 50 degrees Fahrenheit (10 degrees Celsius)?  
    Please note that the Senseo machine does not work in rooms with a temperature below 50 degrees Fahrenheit (10 degrees Celsius). Check that the Senseo machine functions normally when it is used in a room with a temperature above 50 degrees Fahrenheit (10 degrees Celsius).   

    If the above suggestions did not help to solve your problem, please contact the Philips Consumer Care Center in your country. Contact Page 

Flashes slowly:

  1. If your Senseo machine is new and its light ring continues to flash slowly for more than 90 seconds, contact the Philips Consumer Care Center.  Contact Page  


Flashes rapidly, pauses and then flashes rapidly again:

  1. If the light ring around the on/off button flashes rapidly, pauses and then flashes rapidly again after you press one of the buttons, you have not locked the lid properly. Close the lid and lock it by pulling down the lever. Then press the button again.  

Was this document helpful?

Yes No Need to try first

Give us your feedback on this FAQ. What could we have done to to answer your question better?