Question

How do I clean the breast pump?

Answer

Clean/sanitize the breast pump as per the instructions of the user manual (see below).

Note: If you are using the electrical breast pump, there is no need to sanitize the silicone tubes and caps as the milk is not in contact. You SHOULD not clean the motor unit and adapter under water but wipe clean with a soft, damp cloth.

1. Start with disassembling the breast pump and unscrew the bottle from the pump body. Make sure you either use the milk right away or store it in the refrigerator (up to 48 hours and not in the door) or freezer (up to 3 months). Next, unplug the power unit (in case you use the electrical breast pump), after that you can carefully disassemble the breast pump further. Also remove the white valve. Be careful when you remove the white valve and when you clean it. If it gets damaged, your breast pump does not function properly. To remove the white valve, gently pull at the ribbed tab on the side of the valve.

2. Clean all parts (except motor unit and adapter) in hot water with some mild washing-up liquid and then rinse them thoroughly. You can also clean the parts in the dishwasher (on the top rack only). To clean the valve, rub it gently between your fingers in warm water with some washing-up liquid. Do not insert objects into the valve, as this may cause damage.

3. Sanitize all parts (except silicone tubes, caps, motor and adapter) in a Philips AVENT steam sterilizer or by boiling them for 5 minutes. Take care to allow for a cool-down period after the sanitizing cycle has ended: the breast pump can be too hot to touch immediately after sanitization.

Attachments

File name
File size
File date
Language
2.01 MB
2017-03-06
English (US)

Was this document helpful?

Yes No Need to try first

Give us your feedback on this FAQ. What could we have done to to answer your question better?