Question

How do I vent my Xsmall?

Answer

To prevent air and water from remaining in the system too long, the machine must be vented before first use and after a long period of disuse. 
Venting is also necessary after you insert or exchange a filter, as air may enter the system during these operations handling.  

Vent the system:

  • If the warning light is flashing quickly and you are not descaling the machine.   
  • You can vent the system at any time by simply dispensing some hot water. When you dispense hot water, the whole circuit is filled/flushed and pressurized.

 

How to vent the system when the symbol is on the display.

Flashing quickly
(and you did not activate the descaling procedure 2.1)
 

  1. Fill the water tank with water.
  2. Place a container under the hot water/ steam wand or Pannarello.
  3. Turn the control dial to the " " position and wait (a few minutes) until a continuous jet of water comes out of the steam wand.
  4. Turn the control dial back to the "" position.
  5. The machine is now heating up again. The " " light flashes slowly.

 

Was this document helpful?

Yes No Need to try first

Give us your feedback on this FAQ. What could we have done to answer your question better?