Question

What should I do if the DECALC light blinks?

Answer

When DECALC light blinks, please perform EasyDecalc.
CAUTION: Please make sure that iron is cool before performing EasyDecalc.

When you see the DE-CALC light blinking and switch OFF the appliance WHILE it is blinking, you can perform DECALC immediately by opening the EasyDecalc knob and pouring the water into a cup.
Tip: When you perform the descaling procedure, place the appliance on the edge of the table top or near the sink. Water may flow out of the appliance when the EASY DE-CALC knob is being opened.
There are 3 steps to perform the DE-CALC:
1. Hold a cup (with a capacity of at least 350 ml) under the EASY DE-CALC knob and turn the knob anti-clockwise.
2. Remove the EASY DE-CALC knob and let the water with scale particles flow into the cup.
3 When no more water comes out of the appliance, reinsert the EASY DE-CALC knob and tighten it

Was this document helpful?

Yes No Need to try first

Give us your feedback on this FAQ. What could we have done to answer your question better?