Question

How should I load the bottles and accessories into the sterilizer?

Answer

To ensure accurate sterilization, you should follow these instructions:

  1. Make sure all parts that need to be sterilized are clean and completely disassembled.
  2. Place all parts that need to be sterilized in the basket with their openings pointing down to prevent them from filling up with water.
  3. Avoid stacking the items too closely together: Make sure steam is able to circulate around the items to ensure effective sterilization.

 

 Place the bottles upside down in the large basket

 Place the small items such as soothers in the small basket

Put the nipples on the bottom of the basket, place the screw rings loosely on top of the nipples and clip the bottle dome caps into the holders

 Close the sterilizer with the lid

 

 

 

 

 

3 Ways to assemble the sterilizer:
 

1. With only the small basket on the base to sterilize small items such as soothers.

  • When you fill the small basket, put the nipples on the bottom of the basket, place the screw rings loosely on top of the nipples and clip the bottle dome caps into the holders.
 2. With only the large basket on the base to sterilize medium-sized items such as breast pumps, toddler plates or toddler cutlery.
 

3. With the large basket and the small basket on the base to sterilize up to 6 11 oz/330 ml bottles.

  • Place the bottles upside down in the large basket and place the bottle dome caps, screw rings and nipples in the small basket.

 

Was this document helpful?

Yes No Need to try first

Give us your feedback on this FAQ. What could we have done to to answer your question better?